Add interactive pickers to aitools mcp add and remove by simonfaltum · Pull Request #7552 · databricks/cli

simonfaltum · 2026-11-12T12:54:47Z

This pull request is part of the stack that adds the hidden databricks aitools mcp command group. It sits on #7595, which adds and removes agent MCP entries through each agent's own CLI.

databricks aitools mcp add and remove stopped in a terminal with "interactive selection is not available yet" when a flag was missing. This PR replaces that stopgap with pickers. Runs without a terminal keep their flags and output.

Changes

In a terminal, add asks for the profile, the services and the agents that the flags do not give. The profile resolves as it does without a terminal, so the picker runs only where that stops with several profiles.
A run that picks its services checks the profile and chooses the agents before it connects. A missing profile or no agent is refused without a request. A picked service whose recorded entry points at another host is refused after the pick, before anything is written.
The service picker marks services the profile already has as (installed), unchecked. "Another schema..." lists another catalog and schema and keeps the checks.
The plan says add, re-assert (only when the write leaves the entry as it is), update or replace. An agent whose config cannot be read is shown with the reason.
add asks Proceed? only when a picker made a choice. For each sign-in-required server it installed, it asks "Sign in now?" unless the caller is already signed in. Ctrl-C stops the remaining questions and prints the login command of each server still to sign in.
In a terminal, remove with none of --names, --profile or --all shows the installed servers and asks Proceed? before removing the picked ones.

Why

Choosing servers needs their descriptions and sign-in requirements, which the workspace knows and the flags do not show.

Decisions to review

Agents are chosen before the services, so a missing agent or a broken profile is reported before any request. The cost is that the agent question comes first.
A picked service is checked against its recorded entry only after the pick, so one stale entry of another service does not stop the picker.
Installed services are checkable rows, not disabled rows, because the picker library has no disabled options. Checking one re-asserts its entry, as add --names does.
--name without --names is refused rather than offered a single-select picker.
The add --help text changed, so the hidden golden changed. The remove refusal wording changed in repair-and-warnings. No other non-interactive output changed.

Tests

mcp_pickers_test.go covers the service and profile pickers, the agent picker's failed check and the remove picker's refusal.
mcp_add_test.go runs an interactive add through the prompt seams: refusals make no request, a changed host is refused after the pick, two schemas install, and a fully specified run asks only the sign-in question. It also covers the plan lines and a hung credential read.
mcp_remove_test.go runs the remove picker end to end, including a declined confirmation.
libs/aitools/mcp/binding_test.go covers the profile check of a run without a service.
go test -race ./cmd/aitools/ ./libs/aitools/... ./libs/cmdio/, ./task test-exp-aitools and go test ./acceptance -run TestAccept/cmd/aitools pass. GOOS=windows vet passes.
Not tested: a real terminal and a live workspace. The prompts are covered through their seams.

This pull request and its description were written by Isaac.

github-actions · 2026-11-12T13:01:15Z

Commit: 43a64fda8 | Workflow run

Regression test report

Selected 16 changed tests (limit=20, 0 not selected)

16 tests: regression=16 unreleased=0 coverage=0 failing=0

test	branch	main (`8e70c8b`)	latest (v1.26.0)
TestAccept/cmd/aitools/mcp/add-agent-not-installed	✅	❌	❌
TestAccept/cmd/aitools/mcp/add-default-config	✅	❌	❌
TestAccept/cmd/aitools/mcp/add-remove-agent-clis	✅	❌	❌
TestAccept/cmd/aitools/mcp/add-text	✅	❌	❌
TestAccept/cmd/aitools/mcp/add-two-agents	✅	❌	❌
TestAccept/cmd/aitools/mcp/add-two-profiles	✅	❌	❌
TestAccept/cmd/aitools/mcp/add-unparsable-config	✅	❌	❌
TestAccept/cmd/aitools/mcp/drift-profile-missing	✅	❌	❌
TestAccept/cmd/aitools/mcp/hidden	✅	❌	❌
TestAccept/cmd/aitools/mcp/list-and-remove	✅	❌	❌
TestAccept/cmd/aitools/mcp/list-check	✅	❌	❌
TestAccept/cmd/aitools/mcp/login-flips-active	✅	❌	❌
TestAccept/cmd/aitools/mcp/repair-and-warnings	✅	❌	❌
TestAccept/cmd/aitools/mcp/serve-authenticate-tool	✅	❌	❌
TestAccept/cmd/aitools/mcp/serve-binding-errors	✅	❌	❌
TestAccept/cmd/aitools/mcp/serve-passthrough	✅	❌	❌

TestAccept/cmd/aitools/mcp/add-agent-not-installed: branch ✅ | main (8e70c8b) ❌ | latest (v1.26.0) ❌

main (8e70c8b):

acceptance_test.go:1386: Diff:
        --- cmd/aitools/mcp/add-agent-not-installed/output.txt
        +++ /tmp/TestAcceptcmdaitoolsmcpadd-agent-not-installed944825582/002/output.txt
        @@ -2,41 +2,58 @@
         === An agent named with --agents that is not installed is refused; the installed agent still gets the server, and the command exits non-zero
         
         >>> [CLI] aitools mcp add --profile logfood --names system.ai.genie_one_mcp --agents claude-code,antigravity --output json
        -{
        -  "profile": "logfood",
        -  "host": "[DATABRICKS_URL]",
        -  "scope": "global",
        -  "servers": [
        -    {
        -      "name": "genie_one_mcp-logfood",
        -      "service": "system.ai.genie_one_mcp",
        -      "sign_in_required": false,
        -      "agents": [
        -        {
        -          "name": "claude-code",
        -          "status": "installed",
        -          "path": "[TEST_TMP_DIR]/home/.claude.json"
        -        },
        -        {
        -          "name": "antigravity",
        -          "status": "failed",
        -          "error_category": "UNKNOWN_AGENT",
        -          "message": "Antigravity is not installed; install it first or leave it out of --agents"
        -        }
        -      ]
        -    }
        -  ],
        -  "error_category": "TYPE_UNSPECIFIED"
        -}
        +Error: unknown flag: --names
         
        +Usage:
        +  databricks aitools [command]
        +
        +Available Commands:
        +  install     Install Databricks skills and plugins for coding agents
        +  list        List installed skills and plugins
        +  uninstall   Uninstall Databricks skills and plugins
        +  update      Update installed skills and plugins
        +  version     Show installed skills and plugins version
        +
        +Flags:
        +  -h, --help   help for aitools
        +
        +Global Flags:
        +      --debug            enable debug logging
        +  -o, --output type      output type: text or json (default text)
        +  -p, --profile string   ~/.databrickscfg profile
        +  -t, --target string    bundle target to use (if applicable)
        +
        +Use "databricks aitools [command] --help" for more information about a command.
        +
        +
         === Nothing was created for Antigravity
         
         >>> ls -A home
         .claude
        -.claude.json
        -.databricks
         
         === With no installed agent named, the command is refused before any request, and the text output says what to do
         
         >>> [CLI] aitools mcp add --profile logfood --names system.ai.genie_one_mcp --agents antigravity
        -Error: Antigravity is not installed; install it first or leave it out of --agents
        +Error: unknown flag: --names
        +
        +Usage:
        +  databricks aitools [command]
        +
        +Available Commands:
        +  install     Install Databricks skills and plugins for coding agents
        +  list        List installed skills and plugins
        +  uninstall   Uninstall Databricks skills and plugins
        +  update      Update installed skills and plugins
        +  version     Show installed skills and plugins version
        +
        +Flags:
        +  -h, --help   help for aitools
        +
        +Global Flags:
        +      --debug            enable debug logging
        +  -o, --output type      output type: text or json (default text)
        +  -p, --profile string   ~/.databrickscfg profile
        +  -t, --target string    bundle target to use (if applicable)
        +
        +Use "databricks aitools [command] --help" for more information about a command.
        +
        
    acceptance_test.go:1164: 
        LOG.create-genie_one_mcp-logfood: {
        LOG.create-genie_one_mcp-logfood:   "comment": "Ask questions about your data",
        LOG.create-genie_one_mcp-logfood:   "created_by": "tester@databricks.com",
        LOG.create-genie_one_mcp-logfood:   "effective_owner": "tester@databricks.com",
        LOG.create-genie_one_mcp-logfood:   "metastore_id": "7a0ca298-2608-c59b-7a0c-a2982608c6b5",
        LOG.create-genie_one_mcp-logfood:   "name": "mcp-services/system.ai.genie_one_mcp",
        LOG.create-genie_one_mcp-logfood:   "updated_by": "tester@databricks.com"
        LOG.create-genie_one_mcp-logfood: }

latest (v1.26.0):

acceptance_test.go:1386: Diff:
        --- cmd/aitools/mcp/add-agent-not-installed/output.txt
        +++ /tmp/TestAcceptcmdaitoolsmcpadd-agent-not-installed3759424043/002/output.txt
        @@ -2,41 +2,58 @@
         === An agent named with --agents that is not installed is refused; the installed agent still gets the server, and the command exits non-zero
         
         >>> [CLI] aitools mcp add --profile logfood --names system.ai.genie_one_mcp --agents claude-code,antigravity --output json
        -{
        -  "profile": "logfood",
        -  "host": "[DATABRICKS_URL]",
        -  "scope": "global",
        -  "servers": [
        -    {
        -      "name": "genie_one_mcp-logfood",
        -      "service": "system.ai.genie_one_mcp",
        -      "sign_in_required": false,
        -      "agents": [
        -        {
        -          "name": "claude-code",
        -          "status": "installed",
        -          "path": "[TEST_TMP_DIR]/home/.claude.json"
        -        },
        -        {
        -          "name": "antigravity",
        -          "status": "failed",
        -          "error_category": "UNKNOWN_AGENT",
        -          "message": "Antigravity is not installed; install it first or leave it out of --agents"
        -        }
        -      ]
        -    }
        -  ],
        -  "error_category": "TYPE_UNSPECIFIED"
        -}
        +Error: unknown flag: --names
         
        +Usage:
        +  databricks aitools [command]
        +
        +Available Commands:
        +  install     Install Databricks skills and plugins for coding agents
        +  list        List installed skills and plugins
        +  uninstall   Uninstall Databricks skills and plugins
        +  update      Update installed skills and plugins
        +  version     Show installed skills and plugins version
        +
        +Flags:
        +  -h, --help   help for aitools
        +
        +Global Flags:
        +      --debug            enable debug logging
        +  -o, --output type      output type: text or json (default text)
        +  -p, --profile string   ~/.databrickscfg profile
        +  -t, --target string    bundle target to use (if applicable)
        +
        +Use "databricks aitools [command] --help" for more information about a command.
        +
        +
         === Nothing was created for Antigravity
         
         >>> ls -A home
         .claude
        -.claude.json
        -.databricks
         
         === With no installed agent named, the command is refused before any request, and the text output says what to do
         
         >>> [CLI] aitools mcp add --profile logfood --names system.ai.genie_one_mcp --agents antigravity
        -Error: Antigravity is not installed; install it first or leave it out of --agents
        +Error: unknown flag: --names
        +
        +Usage:
        +  databricks aitools [command]
        +
        +Available Commands:
        +  install     Install Databricks skills and plugins for coding agents
        +  list        List installed skills and plugins
        +  uninstall   Uninstall Databricks skills and plugins
        +  update      Update installed skills and plugins
        +  version     Show installed skills and plugins version
        +
        +Flags:
        +  -h, --help   help for aitools
        +
        +Global Flags:
        +      --debug            enable debug logging
        +  -o, --output type      output type: text or json (default text)
        +  -p, --profile string   ~/.databrickscfg profile
        +  -t, --target string    bundle target to use (if applicable)
        +
        +Use "databricks aitools [command] --help" for more information about a command.
        +
        
    acceptance_test.go:1164: 
        LOG.create-genie_one_mcp-logfood: {
        LOG.create-genie_one_mcp-logfood:   "comment": "Ask questions about your data",
        LOG.create-genie_one_mcp-logfood:   "created_by": "tester@databricks.com",
        LOG.create-genie_one_mcp-logfood:   "effective_owner": "tester@databricks.com",
        LOG.create-genie_one_mcp-logfood:   "metastore_id": "7a0ca2a0-4f76-6d1e-7a0c-a2a04f766e5d",
        LOG.create-genie_one_mcp-logfood:   "name": "mcp-services/system.ai.genie_one_mcp",
        LOG.create-genie_one_mcp-logfood:   "updated_by": "tester@databricks.com"
        LOG.create-genie_one_mcp-logfood: }

TestAccept/cmd/aitools/mcp/add-default-config: branch ✅ | main (8e70c8b) ❌ | latest (v1.26.0) ❌

main (8e70c8b):

acceptance_test.go:1386: 
        	Error Trace:	/home/runner/work/cli/cli/libs/testdiff/testdiff.go:22
        	            				/home/runner/work/cli/cli/acceptance/acceptance_test.go:1386
        	            				/home/runner/work/cli/cli/acceptance/acceptance_test.go:1127
        	            				/home/runner/work/cli/cli/acceptance/acceptance_test.go:672
        	Error:      	Not equal: 
        	            	expected: "\n=== Without DATABRICKS_CONFIG_FILE the server is added for the default config file\n\n>>> [CLI] aitools mcp add --profile logfood --names system.ai.genie_one_mcp --agents claude-code\nProfile logfood ([DATABRICKS_URL])\nAgents (named with --agents): claude-code\n\ngenie_one_mcp-logfood  system.ai.genie_one_mcp\n  claude-code  installed  [TEST_TMP_DIR]/home/.claude.json\n\n=== Claude Code config has no pinned variables for the server\n\n>>> gron.py home/.claude.json\njson.mcpServers.genie_one_mcp-logfood.env = {};\n\n=== State holds the binding with no config file\n\n>>> jq .mcp.servers[] | {name, profile, config_file} home/.databricks/aitools/skills/.state.json\n{\n  \"name\": \"genie_one_mcp-logfood\",\n  \"profile\": \"logfood\",\n  \"config_file\": \"\"\n}\n"
        	            	actual  : "\n=== Without DATABRICKS_CONFIG_FILE the server is added for the default config file\n\n>>> [CLI] aitools mcp add --profile logfood --names system.ai.genie_one_mcp --agents claude-code\nError: unknown flag: --names\n\nUsage:\n  databricks aitools [command]\n\nAvailable Commands:\n  install     Install Databricks skills and plugins for coding agents\n  list        List installed skills and plugins\n  uninstall   Uninstall Databricks skills and plugins\n  update      Update installed skills and plugins\n  version     Show installed skills and plugins version\n\nFlags:\n  -h, --help   help for aitools\n\nGlobal Flags:\n      --debug            enable debug logging\n  -o, --output type      output type: text or json (default text)\n  -p, --profile string   ~/.databrickscfg profile\n  -t, --target string    bundle target to use (if applicable)\n\nUse \"databricks aitools [command] --help\" for more information about a command.\n\n\nExit code: 1\n"
        	            	
        	            	Diff:
        	            	--- Expected
        	            	+++ Actual
        	            	@@ -4,21 +4,27 @@
        	            	 >>> [CLI] aitools mcp add --profile logfood --names system.ai.genie_one_mcp --agents claude-code
        	            	-Profile logfood ([DATABRICKS_URL])
        	            	-Agents (named with --agents): claude-code
        	            	+Error: unknown flag: --names
        	            	 
        	            	-genie_one_mcp-logfood  system.ai.genie_one_mcp
        	            	-  claude-code  installed  [TEST_TMP_DIR]/home/.claude.json
        	            	+Usage:
        	            	+  databricks aitools [command]
        	            	 
        	            	-=== Claude Code config has no pinned variables for the server
        	            	+Available Commands:
        	            	+  install     Install Databricks skills and plugins for coding agents
        	            	+  list        List installed skills and plugins
        	            	+  uninstall   Uninstall Databricks skills and plugins
        	            	+  update      Update installed skills and plugins
        	            	+  version     Show installed skills and plugins version
        	            	 
        	            	->>> gron.py home/.claude.json
        	            	-json.mcpServers.genie_one_mcp-logfood.env = {};
        	            	+Flags:
        	            	+  -h, --help   help for aitools
        	            	 
        	            	-=== State holds the binding with no config file
        	            	+Global Flags:
        	            	+      --debug            enable debug logging
        	            	+  -o, --output type      output type: text or json (default text)
        	            	+  -p, --profile string   ~/.databrickscfg profile
        	            	+  -t, --target string    bundle target to use (if applicable)
        	            	 
        	            	->>> jq .mcp.servers[] | {name, profile, config_file} home/.databricks/aitools/skills/.state.json
        	            	-{
        	            	-  "name": "genie_one_mcp-logfood",
        	            	-  "profile": "logfood",
        	            	-  "config_file": ""
        	            	-}
        	            	+Use "databricks aitools [command] --help" for more information about a command.
        	            	 
        	            	+
        	            	+Exit code: 1
        	            	+
        	Test:       	TestAccept/cmd/aitools/mcp/add-default-config
        	Messages:   	cmd/aitools/mcp/add-default-config/output.txt vs /tmp/TestAcceptcmdaitoolsmcpadd-default-config61341042/002/output.txt
    acceptance_test.go:1164: 
        LOG.create-genie_one_mcp-logfood: {
        LOG.create-genie_one_mcp-logfood:   "comment": "Ask questions about your data",
        LOG.create-genie_one_mcp-logfood:   "created_by": "tester@databricks.com",
        LOG.create-genie_one_mcp-logfood:   "effective_owner": "tester@databricks.com",
        LOG.create-genie_one_mcp-logfood:   "metastore_id": "7a0ca298-521a-c1fd-7a0c-a298521ac329",
        LOG.create-genie_one_mcp-logfood:   "name": "mcp-services/system.ai.genie_one_mcp",
        LOG.create-genie_one_mcp-logfood:   "updated_by": "tester@databricks.com"
        LOG.create-genie_one_mcp-logfood: }

latest (v1.26.0):

acceptance_test.go:1386: 
        	Error Trace:	/home/runner/work/cli/cli/libs/testdiff/testdiff.go:22
        	            				/home/runner/work/cli/cli/acceptance/acceptance_test.go:1386
        	            				/home/runner/work/cli/cli/acceptance/acceptance_test.go:1127
        	            				/home/runner/work/cli/cli/acceptance/acceptance_test.go:672
        	Error:      	Not equal: 
        	            	expected: "\n=== Without DATABRICKS_CONFIG_FILE the server is added for the default config file\n\n>>> [CLI] aitools mcp add --profile logfood --names system.ai.genie_one_mcp --agents claude-code\nProfile logfood ([DATABRICKS_URL])\nAgents (named with --agents): claude-code\n\ngenie_one_mcp-logfood  system.ai.genie_one_mcp\n  claude-code  installed  [TEST_TMP_DIR]/home/.claude.json\n\n=== Claude Code config has no pinned variables for the server\n\n>>> gron.py home/.claude.json\njson.mcpServers.genie_one_mcp-logfood.env = {};\n\n=== State holds the binding with no config file\n\n>>> jq .mcp.servers[] | {name, profile, config_file} home/.databricks/aitools/skills/.state.json\n{\n  \"name\": \"genie_one_mcp-logfood\",\n  \"profile\": \"logfood\",\n  \"config_file\": \"\"\n}\n"
        	            	actual  : "\n=== Without DATABRICKS_CONFIG_FILE the server is added for the default config file\n\n>>> [CLI] aitools mcp add --profile logfood --names system.ai.genie_one_mcp --agents claude-code\nError: unknown flag: --names\n\nUsage:\n  databricks aitools [command]\n\nAvailable Commands:\n  install     Install Databricks skills and plugins for coding agents\n  list        List installed skills and plugins\n  uninstall   Uninstall Databricks skills and plugins\n  update      Update installed skills and plugins\n  version     Show installed skills and plugins version\n\nFlags:\n  -h, --help   help for aitools\n\nGlobal Flags:\n      --debug            enable debug logging\n  -o, --output type      output type: text or json (default text)\n  -p, --profile string   ~/.databrickscfg profile\n  -t, --target string    bundle target to use (if applicable)\n\nUse \"databricks aitools [command] --help\" for more information about a command.\n\n\nExit code: 1\n"
        	            	
        	            	Diff:
        	            	--- Expected
        	            	+++ Actual
        	            	@@ -4,21 +4,27 @@
        	            	 >>> [CLI] aitools mcp add --profile logfood --names system.ai.genie_one_mcp --agents claude-code
        	            	-Profile logfood ([DATABRICKS_URL])
        	            	-Agents (named with --agents): claude-code
        	            	+Error: unknown flag: --names
        	            	 
        	            	-genie_one_mcp-logfood  system.ai.genie_one_mcp
        	            	-  claude-code  installed  [TEST_TMP_DIR]/home/.claude.json
        	            	+Usage:
        	            	+  databricks aitools [command]
        	            	 
        	            	-=== Claude Code config has no pinned variables for the server
        	            	+Available Commands:
        	            	+  install     Install Databricks skills and plugins for coding agents
        	            	+  list        List installed skills and plugins
        	            	+  uninstall   Uninstall Databricks skills and plugins
        	            	+  update      Update installed skills and plugins
        	            	+  version     Show installed skills and plugins version
        	            	 
        	            	->>> gron.py home/.claude.json
        	            	-json.mcpServers.genie_one_mcp-logfood.env = {};
        	            	+Flags:
        	            	+  -h, --help   help for aitools
        	            	 
        	            	-=== State holds the binding with no config file
        	            	+Global Flags:
        	            	+      --debug            enable debug logging
        	            	+  -o, --output type      output type: text or json (default text)
        	            	+  -p, --profile string   ~/.databrickscfg profile
        	            	+  -t, --target string    bundle target to use (if applicable)
        	            	 
        	            	->>> jq .mcp.servers[] | {name, profile, config_file} home/.databricks/aitools/skills/.state.json
        	            	-{
        	            	-  "name": "genie_one_mcp-logfood",
        	            	-  "profile": "logfood",
        	            	-  "config_file": ""
        	            	-}
        	            	+Use "databricks aitools [command] --help" for more information about a command.
        	            	 
        	            	+
        	            	+Exit code: 1
        	            	+
        	Test:       	TestAccept/cmd/aitools/mcp/add-default-config
        	Messages:   	cmd/aitools/mcp/add-default-config/output.txt vs /tmp/TestAcceptcmdaitoolsmcpadd-default-config559080536/002/output.txt
    acceptance_test.go:1164: 
        LOG.create-genie_one_mcp-logfood: {
        LOG.create-genie_one_mcp-logfood:   "comment": "Ask questions about your data",
        LOG.create-genie_one_mcp-logfood:   "created_by": "tester@databricks.com",
        LOG.create-genie_one_mcp-logfood:   "effective_owner": "tester@databricks.com",
        LOG.create-genie_one_mcp-logfood:   "metastore_id": "7a0ca2a0-87fc-0937-7a0c-a2a087fc0a57",
        LOG.create-genie_one_mcp-logfood:   "name": "mcp-services/system.ai.genie_one_mcp",
        LOG.create-genie_one_mcp-logfood:   "updated_by": "tester@databricks.com"
        LOG.create-genie_one_mcp-logfood: }

TestAccept/cmd/aitools/mcp/add-remove-agent-clis: branch ✅ | main (8e70c8b) ❌ | latest (v1.26.0) ❌

main (8e70c8b):

acceptance_test.go:1386: Diff:
        --- cmd/aitools/mcp/add-remove-agent-clis/output.txt
        +++ /tmp/TestAcceptcmdaitoolsmcpadd-remove-agent-clis3008848128/002/output.txt
        @@ -2,388 +2,28 @@
         === add goes through each agent's own CLI: the stand-ins are the only agent CLIs on PATH
         
         >>> [CLI] aitools mcp add --profile logfood --names system.ai.genie_one_mcp,system.ai.github --agents claude-code,codex,gemini,copilot --output json
        -{
        -  "profile": "logfood",
        -  "host": "[DATABRICKS_URL]",
        -  "scope": "global",
        -  "servers": [
        -    {
        -      "name": "genie_one_mcp-logfood",
        -      "service": "system.ai.genie_one_mcp",
        -      "sign_in_required": false,
        -      "agents": [
        -        {
        -          "name": "claude-code",
        -          "status": "installed",
        -          "path": "[TEST_TMP_DIR]/home/.claude.json"
        -        },
        -        {
        -          "name": "codex",
        -          "status": "installed",
        -          "path": "[TEST_TMP_DIR]/home/.codex/config.toml"
        -        },
        -        {
        -          "name": "gemini",
        -          "status": "installed",
        -          "path": "[TEST_TMP_DIR]/home/.gemini/settings.json"
        -        },
        -        {
        -          "name": "copilot",
        -          "status": "installed",
        -          "path": "[TEST_TMP_DIR]/home/.copilot/mcp-config.json"
        -        }
        -      ]
        -    },
        -    {
        -      "name": "github-logfood",
        -      "service": "system.ai.github",
        -      "sign_in_required": true,
        -      "agents": [
        -        {
        -          "name": "claude-code",
        -          "status": "installed",
        -          "path": "[TEST_TMP_DIR]/home/.claude.json"
        -        },
        -        {
        -          "name": "codex",
        -          "status": "installed",
        -          "path": "[TEST_TMP_DIR]/home/.codex/config.toml"
        -        },
        -        {
        -          "name": "gemini",
        -          "status": "installed",
        -          "path": "[TEST_TMP_DIR]/home/.gemini/settings.json"
        -        },
        -        {
        -          "name": "copilot",
        -          "status": "installed",
        -          "path": "[TEST_TMP_DIR]/home/.copilot/mcp-config.json"
        -        }
        -      ]
        -    }
        -  ],
        -  "error_category": "TYPE_UNSPECIFIED"
        -}
        +Error: unknown flag: --names
         
        -=== the argv each agent CLI ran for add
        +Usage:
        +  databricks aitools [command]
         
        ->>> cat agent-calls.log
        -claude
        -	mcp
        -	add-json
        -	--scope
        -	user
        -	genie_one_mcp-logfood
        -	{"args":["aitools","mcp","serve","--profile","logfood","--service","system.ai.genie_one_mcp","--agent","claude-code"],"command":"[CLI]","env":{"DATABRICKS_CONFIG_FILE":"[TEST_TMP_DIR]/.databrickscfg"},"type":"stdio"}
        -codex
        -	mcp
        -	add
        -	genie_one_mcp-logfood
        -	--env
        -	DATABRICKS_CONFIG_FILE=[TEST_TMP_DIR]/.databrickscfg
        -	--
        -	[CLI]
        -	aitools
        -	mcp
        -	serve
        -	--profile
        -	logfood
        -	--service
        -	system.ai.genie_one_mcp
        -	--agent
        -	codex
        -gemini
        -	mcp
        -	add
        -	--scope
        -	user
        -	-e
        -	DATABRICKS_CONFIG_FILE=[TEST_TMP_DIR]/.databrickscfg
        -	genie_one_mcp-logfood
        -	[CLI]
        -	--
        -	aitools
        -	mcp
        -	serve
        -	--profile
        -	logfood
        -	--service
        -	system.ai.genie_one_mcp
        -	--agent
        -	gemini
        -copilot
        -	mcp
        -	add
        -	genie_one_mcp-logfood
        -	--tools
        -	*
        -	--env
        -	DATABRICKS_CONFIG_FILE=[TEST_TMP_DIR]/.databrickscfg
        -	--
        -	[CLI]
        -	aitools
        -	mcp
        -	serve
        -	--profile
        -	logfood
        -	--service
        -	system.ai.genie_one_mcp
        -	--agent
        -	copilot
        -claude
        -	mcp
        -	add-json
        -	--scope
        -	user
        -	github-logfood
        -	{"args":["aitools","mcp","serve","--profile","logfood","--service","system.ai.github","--agent","claude-code"],"command":"[CLI]","env":{"DATABRICKS_CONFIG_FILE":"[TEST_TMP_DIR]/.databrickscfg"},"type":"stdio"}
        -codex
        -	mcp
        -	add
        -	github-logfood
        -	--env
        -	DATABRICKS_CONFIG_FILE=[TEST_TMP_DIR]/.databrickscfg
        -	--
        -	[CLI]
        -	aitools
        -	mcp
        -	serve
        -	--profile
        -	logfood
        -	--service
        -	system.ai.github
        -	--agent
        -	codex
        -gemini
        -	mcp
        -	add
        -	--scope
        -	user
        -	-e
        -	DATABRICKS_CONFIG_FILE=[TEST_TMP_DIR]/.databrickscfg
        -	github-logfood
        -	[CLI]
        -	--
        -	aitools
        -	mcp
        -	serve
        -	--profile
        -	logfood
        -	--service
        -	system.ai.github
        -	--agent
        -	gemini
        -copilot
        -	mcp
        -	add
        -	github-logfood
        -	--tools
        -	*
        -	--env
        -	DATABRICKS_CONFIG_FILE=[TEST_TMP_DIR]/.databrickscfg
        -	--
        -	[CLI]
        -	aitools
        -	mcp
        -	serve
        -	--profile
        -	logfood
        -	--service
        -	system.ai.github
        -	--agent
        -	copilot
... (237 more lines truncated, raise DATABRICKS_CLI_TEST_MAX_LOG to see more)

latest (v1.26.0):

acceptance_test.go:1386: Diff:
        --- cmd/aitools/mcp/add-remove-agent-clis/output.txt
        +++ /tmp/TestAcceptcmdaitoolsmcpadd-remove-agent-clis3866199420/002/output.txt
        @@ -2,388 +2,28 @@
         === add goes through each agent's own CLI: the stand-ins are the only agent CLIs on PATH
         
         >>> [CLI] aitools mcp add --profile logfood --names system.ai.genie_one_mcp,system.ai.github --agents claude-code,codex,gemini,copilot --output json
        -{
        -  "profile": "logfood",
        -  "host": "[DATABRICKS_URL]",
        -  "scope": "global",
        -  "servers": [
        -    {
        -      "name": "genie_one_mcp-logfood",
        -      "service": "system.ai.genie_one_mcp",
        -      "sign_in_required": false,
        -      "agents": [
        -        {
        -          "name": "claude-code",
        -          "status": "installed",
        -          "path": "[TEST_TMP_DIR]/home/.claude.json"
        -        },
        -        {
        -          "name": "codex",
        -          "status": "installed",
        -          "path": "[TEST_TMP_DIR]/home/.codex/config.toml"
        -        },
        -        {
        -          "name": "gemini",
        -          "status": "installed",
        -          "path": "[TEST_TMP_DIR]/home/.gemini/settings.json"
        -        },
        -        {
        -          "name": "copilot",
        -          "status": "installed",
        -          "path": "[TEST_TMP_DIR]/home/.copilot/mcp-config.json"
        -        }
        -      ]
        -    },
        -    {
        -      "name": "github-logfood",
        -      "service": "system.ai.github",
        -      "sign_in_required": true,
        -      "agents": [
        -        {
        -          "name": "claude-code",
        -          "status": "installed",
        -          "path": "[TEST_TMP_DIR]/home/.claude.json"
        -        },
        -        {
        -          "name": "codex",
        -          "status": "installed",
        -          "path": "[TEST_TMP_DIR]/home/.codex/config.toml"
        -        },
        -        {
        -          "name": "gemini",
        -          "status": "installed",
        -          "path": "[TEST_TMP_DIR]/home/.gemini/settings.json"
        -        },
        -        {
        -          "name": "copilot",
        -          "status": "installed",
        -          "path": "[TEST_TMP_DIR]/home/.copilot/mcp-config.json"
        -        }
        -      ]
        -    }
        -  ],
        -  "error_category": "TYPE_UNSPECIFIED"
        -}
        +Error: unknown flag: --names
         
        -=== the argv each agent CLI ran for add
        +Usage:
        +  databricks aitools [command]
         
        ->>> cat agent-calls.log
        -claude
        -	mcp
        -	add-json
        -	--scope
        -	user
        -	genie_one_mcp-logfood
        -	{"args":["aitools","mcp","serve","--profile","logfood","--service","system.ai.genie_one_mcp","--agent","claude-code"],"command":"[CLI]","env":{"DATABRICKS_CONFIG_FILE":"[TEST_TMP_DIR]/.databrickscfg"},"type":"stdio"}
        -codex
        -	mcp
        -	add
        -	genie_one_mcp-logfood
        -	--env
        -	DATABRICKS_CONFIG_FILE=[TEST_TMP_DIR]/.databrickscfg
        -	--
        -	[CLI]
        -	aitools
        -	mcp
        -	serve
        -	--profile
        -	logfood
        -	--service
        -	system.ai.genie_one_mcp
        -	--agent
        -	codex
        -gemini
        -	mcp
        -	add
        -	--scope
        -	user
        -	-e
        -	DATABRICKS_CONFIG_FILE=[TEST_TMP_DIR]/.databrickscfg
        -	genie_one_mcp-logfood
        -	[CLI]
        -	--
        -	aitools
        -	mcp
        -	serve
        -	--profile
        -	logfood
        -	--service
        -	system.ai.genie_one_mcp
        -	--agent
        -	gemini
        -copilot
        -	mcp
        -	add
        -	genie_one_mcp-logfood
        -	--tools
        -	*
        -	--env
        -	DATABRICKS_CONFIG_FILE=[TEST_TMP_DIR]/.databrickscfg
        -	--
        -	[CLI]
        -	aitools
        -	mcp
        -	serve
        -	--profile
        -	logfood
        -	--service
        -	system.ai.genie_one_mcp
        -	--agent
        -	copilot
        -claude
        -	mcp
        -	add-json
        -	--scope
        -	user
        -	github-logfood
        -	{"args":["aitools","mcp","serve","--profile","logfood","--service","system.ai.github","--agent","claude-code"],"command":"[CLI]","env":{"DATABRICKS_CONFIG_FILE":"[TEST_TMP_DIR]/.databrickscfg"},"type":"stdio"}
        -codex
        -	mcp
        -	add
        -	github-logfood
        -	--env
        -	DATABRICKS_CONFIG_FILE=[TEST_TMP_DIR]/.databrickscfg
        -	--
        -	[CLI]
        -	aitools
        -	mcp
        -	serve
        -	--profile
        -	logfood
        -	--service
        -	system.ai.github
        -	--agent
        -	codex
        -gemini
        -	mcp
        -	add
        -	--scope
        -	user
        -	-e
        -	DATABRICKS_CONFIG_FILE=[TEST_TMP_DIR]/.databrickscfg
        -	github-logfood
        -	[CLI]
        -	--
        -	aitools
        -	mcp
        -	serve
        -	--profile
        -	logfood
        -	--service
        -	system.ai.github
        -	--agent
        -	gemini
        -copilot
        -	mcp
        -	add
        -	github-logfood
        -	--tools
        -	*
        -	--env
        -	DATABRICKS_CONFIG_FILE=[TEST_TMP_DIR]/.databrickscfg
        -	--
        -	[CLI]
        -	aitools
        -	mcp
        -	serve
        -	--profile
        -	logfood
        -	--service
        -	system.ai.github
        -	--agent
        -	copilot
... (237 more lines truncated, raise DATABRICKS_CLI_TEST_MAX_LOG to see more)

TestAccept/cmd/aitools/mcp/add-text: branch ✅ | main (8e70c8b) ❌ | latest (v1.26.0) ❌

main (8e70c8b):

acceptance_test.go:1386: Diff:
        --- cmd/aitools/mcp/add-text/output.txt
        +++ /tmp/TestAcceptcmdaitoolsmcpadd-text1829904530/002/output.txt
        @@ -2,73 +2,28 @@
         === Text output: Cursor approval hint, and the sign-in step for github
         
         >>> [CLI] aitools mcp add --profile logfood --names system.ai.genie_one_mcp,system.ai.github --agents claude-code,cursor
        -Profile logfood ([DATABRICKS_URL])
        -Agents (named with --agents): claude-code, cursor
        +Error: unknown flag: --names
         
        -genie_one_mcp-logfood  system.ai.genie_one_mcp
        -  claude-code  installed  [TEST_TMP_DIR]/home/.claude.json
        -  cursor       installed  [TEST_TMP_DIR]/home/.cursor/mcp.json
        -Cursor may ask you to approve genie_one_mcp-logfood. Run: cursor-agent mcp enable genie_one_mcp-logfood (the Cursor docs call the CLI agent), or approve it in Cursor's MCP settings.
        +Usage:
        +  databricks aitools [command]
         
        -github-logfood  system.ai.github
        -  claude-code  installed  [TEST_TMP_DIR]/home/.claude.json
        -  cursor       installed  [TEST_TMP_DIR]/home/.cursor/mcp.json
        -system.ai.github needs sign-in. Run: DATABRICKS_CONFIG_FILE=[TEST_TMP_DIR]/.databrickscfg databricks aitools mcp login system.ai.github --profile logfood
        -Cursor may ask you to approve github-logfood. Run: cursor-agent mcp enable github-logfood (the Cursor docs call the CLI agent), or approve it in Cursor's MCP settings.
        +Available Commands:
        +  install     Install Databricks skills and plugins for coding agents
        +  list        List installed skills and plugins
        +  uninstall   Uninstall Databricks skills and plugins
        +  update      Update installed skills and plugins
        +  version     Show installed skills and plugins version
         
        -=== Running it again re-asserts the entries, and nothing is written twice
        +Flags:
        +  -h, --help   help for aitools
         
        ->>> [CLI] aitools mcp add --profile logfood --names system.ai.genie_one_mcp,system.ai.github --agents claude-code,cursor
        -Profile logfood ([DATABRICKS_URL])
        -Agents (named with --agents): claude-code, cursor
        +Global Flags:
        +      --debug            enable debug logging
        +  -o, --output type      output type: text or json (default text)
        +  -p, --profile string   ~/.databrickscfg profile
        +  -t, --target string    bundle target to use (if applicable)
         
        -genie_one_mcp-logfood  system.ai.genie_one_mcp
        -  claude-code  already installed, re-asserted  [TEST_TMP_DIR]/home/.claude.json
        -  cursor       already installed, re-asserted  [TEST_TMP_DIR]/home/.cursor/mcp.json
        +Use "databricks aitools [command] --help" for more information about a command.
         
        -github-logfood  system.ai.github
        -  claude-code  already installed, re-asserted  [TEST_TMP_DIR]/home/.claude.json
        -  cursor       already installed, re-asserted  [TEST_TMP_DIR]/home/.cursor/mcp.json
        -system.ai.github needs sign-in. Run: DATABRICKS_CONFIG_FILE=[TEST_TMP_DIR]/.databrickscfg databricks aitools mcp login system.ai.github --profile logfood
         
        -=== Cursor config
        -
        ->>> cat home/.cursor/mcp.json
        -{
        -  "mcpServers": {
        -    "genie_one_mcp-logfood": {
        -      "args": [
        -        "aitools",
        -        "mcp",
        -        "serve",
        -        "--profile",
        -        "logfood",
        -        "--service",
        -        "system.ai.genie_one_mcp",
        -        "--agent",
        -        "cursor"
        -      ],
        -      "command": "[CLI]",
        -      "env": {
        -        "DATABRICKS_CONFIG_FILE": "[TEST_TMP_DIR]/.databrickscfg"
        -      }
        -    },
        -    "github-logfood": {
        -      "args": [
        -        "aitools",
        -        "mcp",
        -        "serve",
        -        "--profile",
        -        "logfood",
        -        "--service",
        -        "system.ai.github",
        -        "--agent",
        -        "cursor"
        -      ],
        -      "command": "[CLI]",
        -      "env": {
        -        "DATABRICKS_CONFIG_FILE": "[TEST_TMP_DIR]/.databrickscfg"
        -      }
        -    }
        -  }
        -}
        +Exit code: 1
        
    acceptance_test.go:1164: 
        LOG.create-genie_one_mcp-logfood: {
        LOG.create-genie_one_mcp-logfood:   "comment": "Ask questions about your data",
        LOG.create-genie_one_mcp-logfood:   "created_by": "tester@databricks.com",
        LOG.create-genie_one_mcp-logfood:   "effective_owner": "tester@databricks.com",
        LOG.create-genie_one_mcp-logfood:   "metastore_id": "7a0ca298-4556-8599-7a0c-a298455686eb",
        LOG.create-genie_one_mcp-logfood:   "name": "mcp-services/system.ai.genie_one_mcp",
        LOG.create-genie_one_mcp-logfood:   "updated_by": "tester@databricks.com"
        LOG.create-genie_one_mcp-logfood: }
    acceptance_test.go:1164: 
        LOG.create-github-logfood: {
        LOG.create-github-logfood:   "comment": "Repositories, issues, pull requests",
        LOG.create-github-logfood:   "config": {
        LOG.create-github-logfood:     "source_connection": {
        LOG.create-github-logfood:       "name": "connections/github",
        LOG.create-github-logfood:       "options": {
        LOG.create-github-logfood:         "oauth_provider": "OAUTH_PROVIDER_GITHUB_MCP"
        LOG.create-github-logfood:       }
        LOG.create-github-logfood:     }
        LOG.create-github-logfood:   },
        LOG.create-github-logfood:   "created_by": "tester@databricks.com",
        LOG.create-github-logfood:   "effective_owner": "tester@databricks.com",
        LOG.create-github-logfood:   "metastore_id": "7a0ca298-4842-423e-7a0c-a29848424357",
        LOG.create-github-logfood:   "name": "mcp-services/system.ai.github",
        LOG.create-github-logfood:   "updated_by": "tester@databricks.com"
        LOG.create-github-logfood: }

latest (v1.26.0):

acceptance_test.go:1386: Diff:
        --- cmd/aitools/mcp/add-text/output.txt
        +++ /tmp/TestAcceptcmdaitoolsmcpadd-text3562798137/002/output.txt
        @@ -2,73 +2,28 @@
         === Text output: Cursor approval hint, and the sign-in step for github
         
         >>> [CLI] aitools mcp add --profile logfood --names system.ai.genie_one_mcp,system.ai.github --agents claude-code,cursor
        -Profile logfood ([DATABRICKS_URL])
        -Agents (named with --agents): claude-code, cursor
        +Error: unknown flag: --names
         
        -genie_one_mcp-logfood  system.ai.genie_one_mcp
        -  claude-code  installed  [TEST_TMP_DIR]/home/.claude.json
        -  cursor       installed  [TEST_TMP_DIR]/home/.cursor/mcp.json
        -Cursor may ask you to approve genie_one_mcp-logfood. Run: cursor-agent mcp enable genie_one_mcp-logfood (the Cursor docs call the CLI agent), or approve it in Cursor's MCP settings.
        +Usage:
        +  databricks aitools [command]
         
        -github-logfood  system.ai.github
        -  claude-code  installed  [TEST_TMP_DIR]/home/.claude.json
        -  cursor       installed  [TEST_TMP_DIR]/home/.cursor/mcp.json
        -system.ai.github needs sign-in. Run: DATABRICKS_CONFIG_FILE=[TEST_TMP_DIR]/.databrickscfg databricks aitools mcp login system.ai.github --profile logfood
        -Cursor may ask you to approve github-logfood. Run: cursor-agent mcp enable github-logfood (the Cursor docs call the CLI agent), or approve it in Cursor's MCP settings.
        +Available Commands:
        +  install     Install Databricks skills and plugins for coding agents
        +  list        List installed skills and plugins
        +  uninstall   Uninstall Databricks skills and plugins
        +  update      Update installed skills and plugins
        +  version     Show installed skills and plugins version
         
        -=== Running it again re-asserts the entries, and nothing is written twice
        +Flags:
        +  -h, --help   help for aitools
         
        ->>> [CLI] aitools mcp add --profile logfood --names system.ai.genie_one_mcp,system.ai.github --agents claude-code,cursor
        -Profile logfood ([DATABRICKS_URL])
        -Agents (named with --agents): claude-code, cursor
        +Global Flags:
        +      --debug            enable debug logging
        +  -o, --output type      output type: text or json (default text)
        +  -p, --profile string   ~/.databrickscfg profile
        +  -t, --target string    bundle target to use (if applicable)
         
        -genie_one_mcp-logfood  system.ai.genie_one_mcp
        -  claude-code  already installed, re-asserted  [TEST_TMP_DIR]/home/.claude.json
        -  cursor       already installed, re-asserted  [TEST_TMP_DIR]/home/.cursor/mcp.json
        +Use "databricks aitools [command] --help" for more information about a command.
         
        -github-logfood  system.ai.github
        -  claude-code  already installed, re-asserted  [TEST_TMP_DIR]/home/.claude.json
        -  cursor       already installed, re-asserted  [TEST_TMP_DIR]/home/.cursor/mcp.json
        -system.ai.github needs sign-in. Run: DATABRICKS_CONFIG_FILE=[TEST_TMP_DIR]/.databrickscfg databricks aitools mcp login system.ai.github --profile logfood
         
        -=== Cursor config
        -
        ->>> cat home/.cursor/mcp.json
        -{
        -  "mcpServers": {
        -    "genie_one_mcp-logfood": {
        -      "args": [
        -        "aitools",
        -        "mcp",
        -        "serve",
        -        "--profile",
        -        "logfood",
        -        "--service",
        -        "system.ai.genie_one_mcp",
        -        "--agent",
        -        "cursor"
        -      ],
        -      "command": "[CLI]",
        -      "env": {
        -        "DATABRICKS_CONFIG_FILE": "[TEST_TMP_DIR]/.databrickscfg"
        -      }
        -    },
        -    "github-logfood": {
        -      "args": [
        -        "aitools",
        -        "mcp",
        -        "serve",
        -        "--profile",
        -        "logfood",
        -        "--service",
        -        "system.ai.github",
        -        "--agent",
        -        "cursor"
        -      ],
        -      "command": "[CLI]",
        -      "env": {
        -        "DATABRICKS_CONFIG_FILE": "[TEST_TMP_DIR]/.databrickscfg"
        -      }
        -    }
        -  }
        -}
        +Exit code: 1
        
    acceptance_test.go:1164: 
        LOG.create-genie_one_mcp-logfood: {
        LOG.create-genie_one_mcp-logfood:   "comment": "Ask questions about your data",
        LOG.create-genie_one_mcp-logfood:   "created_by": "tester@databricks.com",
        LOG.create-genie_one_mcp-logfood:   "effective_owner": "tester@databricks.com",
        LOG.create-genie_one_mcp-logfood:   "metastore_id": "7a0ca2a0-7cba-5697-7a0c-a2a07cba57ba",
        LOG.create-genie_one_mcp-logfood:   "name": "mcp-services/system.ai.genie_one_mcp",
        LOG.create-genie_one_mcp-logfood:   "updated_by": "tester@databricks.com"
        LOG.create-genie_one_mcp-logfood: }
    acceptance_test.go:1164: 
        LOG.create-github-logfood: {
        LOG.create-github-logfood:   "comment": "Repositories, issues, pull requests",
        LOG.create-github-logfood:   "config": {
        LOG.create-github-logfood:     "source_connection": {
        LOG.create-github-logfood:       "name": "connections/github",
        LOG.create-github-logfood:       "options": {
        LOG.create-github-logfood:         "oauth_provider": "OAUTH_PROVIDER_GITHUB_MCP"
        LOG.create-github-logfood:       }
        LOG.create-github-logfood:     }
        LOG.create-github-logfood:   },
        LOG.create-github-logfood:   "created_by": "tester@databricks.com",
        LOG.create-github-logfood:   "effective_owner": "tester@databricks.com",
        LOG.create-github-logfood:   "metastore_id": "7a0ca2a0-7f19-9270-7a0c-a2a07f1993cd",
        LOG.create-github-logfood:   "name": "mcp-services/system.ai.github",
        LOG.create-github-logfood:   "updated_by": "tester@databricks.com"
        LOG.create-github-logfood: }

12 more failure details omitted, see the full report in the run.

eng-dev-ecosystem-bot · 2026-11-12T13:32:01Z

✅ Integration test report

Commit: 43a64fd

Run: 43449453502

	Env	🔄flaky	💚RECOVERED	✅pass	🙈skip	Time
💚	aws linux-2core-8gb		1	270	31	14:34
💚	aws-windows-latest-4core-16gb		1	272	29	9:10
🔄	azure linux-2core-8gb	2	1	267	31	11:47
💚	azure-windows-latest-4core-16gb		1	271	29	7:52
💚	gcp linux-2core-8gb		1	270	31	10:30
💚	gcp-windows-latest-4core-16gb		1	272	29	8:53

	Test Name	aws linux-2core-8gb	aws-windows-latest-4core-16gb	azure linux-2core-8gb	azure-windows-latest-4core-16gb	gcp linux-2core-8gb	gcp-windows-latest-4core-16gb
💚	TestAccept	💚R	💚R	💚R	💚R	💚R	💚R
🔄	TestSyncIncrementalSyncPythonNotebookDelete	✅p	✅p	🔄f	✅p	✅p	✅p
🔄	TestSyncNestedFolderSync	✅p	✅p	🔄f	✅p	✅p	✅p

Top 9 slowest tests (at least 2 minutes):

duration	env	testname
5:30	aws linux-2core-8gb	TestFilerWorkspaceFilesExtensionsReadDir
3:47	aws-windows-latest-4core-16gb	TestAccept
3:40	azure-windows-latest-4core-16gb	TestAccept
3:39	gcp-windows-latest-4core-16gb	TestAccept
2:34	aws-windows-latest-4core-16gb	TestTelemetryEndpoint
2:25	aws-windows-latest-4core-16gb	TestImportDirWithOverwriteFlag
2:14	gcp linux-2core-8gb	TestFilerWorkspaceFilesExtensionsDelete
2:09	azure linux-2core-8gb	TestFilerRecursiveDelete/workspace_files
2:03	aws linux-2core-8gb	TestAccept

mcp add and mcp remove prompt for the profile, the services and the location when run in a terminal without flags. The agent picker and the proceed prompt are shared with install. The picker prompts use one help text, and a declined prompt ends with the same cancelled message. Main's install flow keeps its own scope title and plan output. The mcp add picker uses the global scope, which is the scope mcp add reports. Co-authored-by: Isaac <no-reply@databricks.com>

simonfaltum changed the base branch from aitools-mcp/07-login to aitools-mcp/08-challenge November 12, 2026 13:02

simonfaltum force-pushed the aitools-mcp/09-pickers branch from f9ffc67 to 2dd54b7 Compare November 12, 2026 13:02

simonfaltum mentioned this pull request Nov 12, 2026

Log AitoolsMcpEvent from aitools mcp and the serve proxy #7554

Draft

simonfaltum force-pushed the aitools-mcp/08-challenge branch from 38cdd13 to 1d8e6b3 Compare November 12, 2026 14:42

simonfaltum force-pushed the aitools-mcp/09-pickers branch from 2dd54b7 to a1fd867 Compare November 12, 2026 14:44

simonfaltum force-pushed the aitools-mcp/08-challenge branch from 1d8e6b3 to 7b98424 Compare November 12, 2026 17:14

simonfaltum force-pushed the aitools-mcp/09-pickers branch from a1fd867 to b90afff Compare November 12, 2026 17:15

simonfaltum force-pushed the aitools-mcp/08-challenge branch 2 times, most recently from 1c6aee6 to 7a9dca9 Compare November 13, 2026 07:25

simonfaltum force-pushed the aitools-mcp/09-pickers branch 2 times, most recently from 0aa2ee4 to 2dbdfe3 Compare November 13, 2026 12:28

simonfaltum changed the base branch from aitools-mcp/08-challenge to aitools-mcp/08b-agent-clis November 13, 2026 12:28

simonfaltum force-pushed the aitools-mcp/09-pickers branch from 1fff1da to e9bad5b Compare November 13, 2026 13:28

simonfaltum force-pushed the aitools-mcp/08b-agent-clis branch from 3ed1398 to 8cca61b Compare November 13, 2026 15:06

simonfaltum force-pushed the aitools-mcp/09-pickers branch from b30caa0 to 43a64fd Compare November 13, 2026 15:06

Navigation Menu

Repository navigation

Add interactive pickers to aitools mcp add and remove - #7552

Add interactive pickers to aitools mcp add and remove#7552
simonfaltum wants to merge 1 commit into
aitools-mcp/08b-agent-clisfrom
aitools-mcp/09-pickers

simonfaltum commented Nov 12, 2026 •

edited

Loading

Uh oh!

github-actions Bot commented Nov 12, 2026 •

edited

Loading

Uh oh!

eng-dev-ecosystem-bot commented Nov 12, 2026 •

edited

Loading

Uh oh!

This branch has not been deployed

Reviewers

Uh oh!

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

Conversation

simonfaltum commented Nov 12, 2026 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Changes

Why

Decisions to review

Tests

Uh oh!

github-actions Bot commented Nov 12, 2026 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Regression test report

Uh oh!

eng-dev-ecosystem-bot commented Nov 12, 2026 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

✅ Integration test report

Uh oh!

This branch has not been deployed

Reviewers

Uh oh!

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

simonfaltum commented Nov 12, 2026 •

edited

Loading

github-actions Bot commented Nov 12, 2026 •

edited

Loading

eng-dev-ecosystem-bot commented Nov 12, 2026 •

edited

Loading